home *** CD-ROM | disk | FTP | other *** search
- Θ└PSTEST Version 5.40
- Copyright 1986-1993, The Periscope Company, Inc. All rights reserved.
- $This program is used to test Periscope I and III boards. The options are:
- /0 -- Test Periscope I, Rev 1 board (16K)
- /1 -- Test Periscope I, Rev 2 board (56K)
- /2 -- Test Periscope I, Rev 3 and I/MC boards (512-2048K)
- /3 -- Test Periscope III board (64K)
- /A -- Analyze memory use from segment A000H to F000H
- /C:nnnn -- Run tests multiple times, where nnnn is a hex number
- /E -- Set error exit mode, activating Periscope if an error is found
- /M:nnnn -- Use protected memory segment other than D000H
- /N -- Set noisy mode, beeping after each error
- /P:nnn -- Use write protect port other than 300H
- /S -- Set silent mode, showing only error messages
- /V -- Set verbose mode, placing each message on a separate line
- Note: The /M and /P options are not used when testing Model I/MC
- $ Ç ╨ xx: $ 0123456789ABCDEF .. found $É $Error 160 Invalid option
- $Error 161 00 test failed
- $Error 161 55 test failed
- $Error 161 AA test failed
- $Error 161 FF test failed
- $Error 161 55AA test failed
- $Error 162 Page test 1 failed at page 00
- $Error 162 Page test 2 failed at page 00
- $Error 163 Rotate failed
- $Error 164 Write protect failed
- $Error 165 Copy test failed
- $Error 166 Not enough memory
- $Error 167 Refresh test failed
- $Error 168 Board running faster than rated speed
- $** Borderline condition: board *may* work correctly without adding a wait **
- ** state -- run this test multiple times to confirm proper operation of **
- ** the board or add a wait state to be safe. **
- $00 test ok
- $55 test ok
- $AA test ok
- $FF test ok
- $Rotate test ok
- $Copy test ok
- $Write protect ok
- $No errors detected
- $Board has $512 KB.
- $1.0 MB.
- $1.5 MB.
- $2.0 MB.
- $Warning: /M and /P options ignored on PS/2 system
- $Enter "PSTEST ?" to get help
- $Testing Periscope I, Rev 2 board (56K). $Columns represent error counts for U1-U7
- $Testing Periscope III board (64K). $Columns represent error counts for U29-U32 & U38-U41
- $Testing Periscope I, Rev 1 board (16K). $Columns represent error counts for U1-U8
- $Testing Periscope I, Rev 3 board. $For pages from 00-3FH [L], columns represent error counts for U32-U25.
- For pages from 00-3FH [H], columns represent error counts for U24-U17.
- For pages from 40-7FH [L], columns represent error counts for U16-U8.
- For pages from 40-7FH [H], columns represent error counts for U8-U1.
- $CPU speed = MHz.
- Relative access time for Periscope's memory = (read); (write).
- Relative access time for memory in an 8MHz IBM AT = 100 (read); 61 (write).
- Relative access time for low memory in this system = (read); (write).
- $Testing Periscope I/MC board. $For pages from 00-3FH, columns represent error counts for U13-U16.
- For pages from 40-7FH, columns represent error counts for U9-U12.
- For pages from 80-BFH, columns represent error counts for U5-U8.
- For pages from C0-FFH, columns represent error counts for U1-U4.
- Periscope's memory segment = ....H; Periscope's port address = ....H.
- $Warning: Periscope's memory has been changed -- rerun PS.COM
- $Testing refresh ...
- $Ahh ...
- $unused.
- $RAM.
- $ROM.
- $ROM with no signature or write-protected RAM.
- $Segment ....H to ....H is $55AA test ok
- $Numerator: . Denominator/2: .
- $ⁿ╝v║Φï
- Φ^Φ╦πëêëèΦPÇ>Σ t
- Ç>µ t║¿ Φd
- Ç>▐uΦ╙ Θ╦ ΦbΦ╖íå║¼
- ╟ä╓
- = @tD║╟ä%Ç>Σ t║F
- DŽf
- ╞$= Çt!║√ ╟ä%
- = αt║P
- DŽu
- = uRΦ└ZΦ∙ÄèΦºÇ>Σ tïè╛ÄΦ┴
- ïê╛░Φ╖
- ║qΦ╤ü>å ÇuΘïû╟Ç ΦBâ>Ç u║\ Φ╜ΓΦïê░ εâ>é tΘCΦ¼
- Φïê░ ε╕ L═!╞▀ ╗ áëαü√ ≡rΘì Ä├3 &ïü√ └r"=U¬uÇ>▀tΦu ╞▀┤ &èE▒╙α╪δ╚&ï≈╨ï╚·&ç&ï&ç√;╩uÇ>▀tΦB ╞▀ü├Ç δ¥Φ{ = wÇ>▀ tΦ% ╞▀ ü├Ç δÇÇ>▀tΦ ╞▀ü├Ç Θj Φ ├;αt;ïα╛rΦ▒ ï╙J╛{Φ¿ ║jΦ┬á▀║"<